Uporabljamo piškotke, da naredimo vašo izkušnjo boljšo. V skladu z novo direktivo o e-zasebnosti, vas moramo vprašati za soglasje o nastavitvi piškotkov. Izvedite več.
CARB.KIT PHBL25 BS reed cyl. 1st series VESPA ET3 125
404,43 €
Na zalogi Dostava: od 3 do 7 dni
SKU
1610690
Datumi dostave so informativne narave. Pri dostavi lahko prihaja do zamud na katero nimamo vpliva.
Malossi fuel system
These systems have been specially designed and calibrated for
high-performancemotors, and are complete with all accessories needed for
assembly (see generalcatalogue).
MALOSSI is the leader in the design and
production of specialfuel systems for motorcycles and scooters.
MALOSSI systems are the result of intense research and precision drawingsand
calculations. The suction pipes, reed valves, and air intakes designedby
MALOSSI undergo efficiency tests and destructive tests to check
theirperformance and reliability.
Carburetors are customized for each vehicle according to the specific
characteristicsof the motor and air intake, and are completely calibrated
for dosage ofthe air-fuel mixture under all power delivery conditions.
MALOSSI produces special components for fuel systems in order to supplya
product that responds perfectly to the needs of the most demanding customer.
Technical features:
Carburettor with elastic connection (B) and adjusting screws on the left (S).
Products reserved exclusively for racing in specifically designed locations according to the provisions of the competent sporting authorities. We disclaim all liability for improper use
| mallosi product manuals | https://wemalossistore.blob.core.windows.net/files/montaggio/pdm/impianti.pdf |
|---|
VESPA : VESPA ET3 Primavera 125 2T, VESPA Primavera 125 2T
aluminium tilted intake manifold ø 25x27,5x46,5 : 024357B
vlve seat wheelbase 60 mm for phbl 25 : 0215643B
red filter e14 ø 38 inclined 30° for phbl 22 carburettors : 0411461
intake manifold gasket set reed cylinder for vespa 125 cc : 1117209
diffuser for vl6-vl15 reed valve : 1213035B
intake rubber for phbl 20-25 b (37 mm) carburettors : 134579B
clamp h.9 mm tightening 32 ÷ 50 : 210777B
clamp h.9 mm tightening 25 ÷ 45 : 210871B
starter cable length 144,5 mm - ø wire 0,8mm : 221954B
gas cable length 2055 mm - ø wire 1,2mm : 223631B
inclined tube kit 160° total overall length 50mm with external thread m6x0.75 7.5mm long and internal thread m5x0.75 15mm long : 263991
valve vl6 with carbon petals thickness 0.30 : 274235.C0
valve vl6 with karbonit petals thickness 0.30 : 274235.K0
gas cable clamp ø 5.5x9 : 373640
carburettor phbl 25 b for vespa et3 primavera 2t - ets - pk - pk xl 125 cc (reed valve) : 725790